Rack Cooling – What is it?

Rack Cooling is required in all cases where server racks with functioning IT equipment are present. The importance of rack cooling for all cabinets is often underestimated; however, inadequate cooling can seriously undermine the performance and longevity of all the equipment in server racks. It is designed to mitigate and even eliminate hotspots in the server racks.

Rack-mount servers and data communications devices consume electrical power, which ends up heating these devices. If they are not cooled, then their speed of operation and failure rate are badly affected. This is where rack cooling comes in. The phrase ‘rack cooling’ refers primarily to the process of cooling the rack in a cabinet. ‘Rack cooling’ can also be used to refer to the device that is engaged in the cooling. The amount of cooling necessary in a cabinet will vary enormously, depending on the equipment it houses. The cooling method for server racks depends on the cabinet’s location and the required cooling capacity. Rack cooling as a function is defined and described, from the most enormous scale to the smallest, as ‘Cold Aisle containment’, ‘In-Row’ cooling and ‘In-Rack’ cooling.

Data Centres

Cooling IT equipment in data centres uses complex cooling systems. Cold aisle containment involves large cooling devices and underfloor ducting for the delivery of the cooling air to go to each cabinet, and the use of enclosed aisles so that the hot waste air from the cabinets does not mix with the cooling air. Cooling systems are used in purpose-built data centres to cool all the equipment in the server racks. 19” racks form the basic structure of datacentres, and Cold Aisle containment cooling is achieved by the positioning of the racks to contain and separate the cold and hot air effectively.

Server Room Cooling

When it comes to cooling individual cabinets, there are several options. One way is to put cabinets in dedicated ‘server rooms’. The whole room is then cooled as much as possible with air conditioning, to keep all the equipment inside the rack within the manufacturer’s recommended temperature range. This has the drawbacks of wasting space and consuming a lot of power for the cooling systems. However, the main disadvantage is its limited effect, as the rack cooling air is not distributed evenly throughout the room or the rack, resulting in ‘hot spots’ in the equipment.

In-Rack Cooling

In-Rack cooling systems are those that are part of each server rack and precisely cool the contents of each rack. The server racks are in closed cabinets, and the cooling systems internally separate the hot and cold air. In-Rack cooling is a closed system that is highly effective at eliminating hotspots. Increasingly, In-Rack cooling plays a significant role in IT infrastructure, particularly in high-density server racks commonly found in edge applications and micro data centres.

Passive Cooling

Another method of rack cooling is by passive means, using uncooled air. This is achieved by removing all panels from the server cabinet, utilising mesh doors, and spacing the kit inside to maximise the natural airflow through the equipment for cooling. This has the drawbacks of limited cooling capacity and that the equipment is physically unsecured. Alternatively, special cabinets with built-in fans can be used to force uncooled air over the equipment. These are more effective but offer less cooling than active cooling systems.

Active Cooling

Active cooling of a standalone cabinet uses a built-in air conditioning unit to provide cooled air to the devices inside it. The system itself uses power to cool the air and provides more cooling capacity than passive methods. Active in-rack cooling methods offer the most cooling capacity using the smallest space possible. They offer significantly more flexibility in cabinet placement to server rooms, but care is needed when implementing them. To get the system best performing, consider the airflow within the cabinet to ensure that there are no hotspots where cooling does not reach and where airflow through all of the servers is assured. Also, consider the fact that most air con systems will need to rest for up to 3 minutes from when they switch off to when they can switch on again, to protect their working parts. If the temperature in the cabinet rises too much in that time due to the high heat load inside, then the service life, speed and reliability of the equipment inside will be compromised. If this is the case, select a system that can cycle on and off rapidly.

Rack cooling has allowed businesses to develop edge functions. Server rack cooling cabinets are particularly suitable for remote working and processing large volumes of data quickly in house, without latency associated with remote storage. Depending on the scale of the IT function and data storage, either Cold Aisle containment, In-row Cooling or In-rack Cooling is used to keep all the equipment in server racks working as effectively as possible, given the variables and limitations of each location. If you are looking for a cost-effective way of cooling your servers in an office environment, take a look at our 3KW, 4KW and 5KW systems.